|
Installation
The backplate has 4 threaded holes, one on
each arm which line up with the holes on a standard Socket
775 Motherboard. To make the installation simpler, the plate
comes with an adhesive pad in the centre. This has two
functions, firstly to insulate the plate from the back of
the motherboard, and secondly to hold the plate in place
while you screw the mount to it from the other side.
To mount the hold down onto the block itself
you'll need to remove the four allen screws from the base of
the block, essentially dismantling it.
Now line up the hold down bracket with the
bottom of the block. Take care to ensure the block's several
layers remain fixed as it's easy to dislodge the rubber
seals inside which could lead to you're case become an ideal
home for goldfish.
<Back
Next >
|